Make a DIY Monitor Stand for a Smart TV

I made a DIY monitor stand for my new Vizio 24" Smart TV.  The stand has a height adjustment that can put the TV at eye level for computer use.  Check out the video and pictures below.

I created a set of cutting templates for this project.  Click here to download the PDF of my templates.  This stand is designed for a Vizio D24F Smart TV, so you may have to adjust the templates if you are making this project for a different TV.

The Vizio D24F Smart TV has mounting holes that are 10cm apart on center.  The holes require four metric M4 screws.  I used 16mm long screws that were too short to go through 3/4" lumber, so I drilled counter-bores to recess the screws.  Make sure there is only about 1/4" of screw that goes into the TV to prevent the screw from damaging internal components.

I made my own adjustment knob using epoxy and a 1/4"-20 bolt cut to size.  It screws into a standard 1/4"-20 threaded insert in the bracket.  This worked out great and saved me time and money by eliminating a trip to the hardware store.

Isn't that walnut just beautiful?  This was an easy custom project that can be made with just a jig saw and a drill.  If you need a monitor stand, try making one yourself!

PROJECT UPDATE!  After using the stand for a few days, I realized that the back of the TV is a little rounded, and as a result, the monitor was tilted forward slightly.  I decided to cut the bottom of the upright piece at a 3-degree angle so the monitor would tilt back a little.  This simple fix did the trick!

Make a Space-Saving TV Console Stand!

One of the greatest benefits of being a woodworker is the ability to create custom-size furniture to fit your needs.  My friend needed a compact TV Console to fit in a small space in his condo, so watch my video to see how this custom project turned out.

He provided a well-done measured drawing to help me get started.  It contained the overall dimensions of the unit, plus the dimensions of the openings to house his electronic components.  Using his drawing, I created this TV Console Plan and Cut List taking into account the thickness of the 3/4" lumber.  This entire project was built using three 8-foot 1"x12" boards and one 2'x4' piece of Luan plywood from the home center.

The boards for the main unit were ripped down to 10" wide, while the top needed to be 12" wide to overhang the power outlet on the wall.  Since a 1"x12" board is actually 11-1/4" wide, I attached an additional 3/4" strip to make it 12".

I could have used pocket screws to join the unit together, but I thought the holes would be too visible.  So, I used my old standby of screws with dowel screw head covers.  This makes for a strong joint, plus I like the look of the dowel plugs.  I think the key to making this look nice is lining up the screws with equal spacing between them.

The shelves in the bottom of the unit are adjustable.  I made a shelf pin drilling jig to help quickly drill holes for the 3/16" shelf pins.  This will allow for some flexibility when housing the electronic components.

The doors are basically mitered picture frames with splines in the corners to add strength.  My friend plans to insert frosted glass panels into the recessed rabbets on the inside.  He also plans to put glass shelves one each side with lights which will look really cool.  I made some handles for the doors, hung them on the console with hinges, and added a magnetic door catch.

Now that the woodworking part is done, I have handed the project over to my friend to apply his choice of finish, as well as glass door panels and shelves.  I promise to write an update on this project which he finishes his assigned homework.  Thanks to my friend for requesting this fun project and having confidence in my woodworking skills!

Update!  Here is a picture of the finished project.  My friend did an awesome job finishing it.  Looks great!