Pages

Sunday, December 29, 2019

Making a Guitar Shaped Side Table with an X-Carve CNC Machine

I needed a side table to put next to my favorite chair in my office/music room.  I have several guitars on display, so I thought it would be cool to make a guitar shaped side table to keep the music theme going.  I used my X-Carve CNC Woodworking Machine from Inventables to cut the table top and legs.  Check out the video of this project below.


I'd like to thank Inventables for sponsoring this project.  I used their free EASEL online software to design the project.  The top is cut from a 16"x24" panel of 3/4" walnut.  The legs are cut from a 9"x21" section of 9/16" thick maple.  (I had to plane the maple down to 9/16" thick so that the standard tuning pegs would fit.  I also made the mortises 9/16" wide to match.)   Click here to open my EASEL project to see how it's designed.



The design includes the mortise and tenon joinery for gluing the legs into the table top.  The CNC leaves rounded inside corners on the tenons, so those need to be sharpened up with a chisel, file or saw so the joint will fit tightly.


I purchased an inexpensive set of Guitar Tuners from CB Gitty.  You will notice that one of the holes in the scaled-down guitar neck legs is larger than the others.  This is to mount one of the standard size guitar tuners on each leg.  I strung up a regular .042" A string between the tuners for some additional support to keep the legs from spreading apart under weight.  The .056" E string would be a little stronger and more visible, but I didn't have one on hand.


This Guitar Side Table is a great addition to my office/music room.  I love it and it's a great conversation piece.  The walnut and maple look beautiful and I think the "stringer" at the bottom is pretty clever if I do say so myself.  Thanks for checking out my project!



Clicking a referral/affiliate link in this article and making a purchase will help to support my channel via a small referral fee from the merchant.  Thank you for your support!

1 comment:

  1. Love the design! The string stretchers is a nice touch.

    ReplyDelete

Note: Only a member of this blog may post a comment.